What are the characteristics of diamond blades
Diamond blades are composed of diamond and other chemical elements. The reasonable structure of diamond and chemical element powder is the key to the quality of diamond blades. In the cutting and milling stage of a good diamond blade, its operating surface is concave, that is, the center is low and the side is high. This type of blade can improve the working condition of the work surface, reduce the lateral pressure, and ensure the purpose of improving the cutting amount and milling quality.
The difference between a good diamond blade and a poor diamond blade is very obvious. For example, in terms of efficiency, a good blade has a very high cutting efficiency, while a poor blade cuts slowly and is easy to lose teeth. For stone factories, The use of poor blades not only affects the efficiency of production and processing, but sometimes damages stone or machinery, and even produces production safety accidents. Choosing a good blade is something that every stone factory must deal with. Below, By introducing many common characteristics of high-quality blades in detail, we can better compare and refer to them when choosing blades, and then choose blade products suitable for our own stone factory.
What are the characteristics of diamond blades？
1. High cutting efficiency
In the stone production process, cutting is a very critical step. Selecting a good blade should be reflected in the efficiency level. If the efficiency is not high, the feed rate and the feed rate are too slow, which will reduce the efficiency of the production of the plate, and then Increase product costs, such as employee salaries, water and electricity bills, etc., and will directly affect the development of subsequent processes, so the key to cutting blades is efficiency, and blades without cutting efficiency are definitely not good blades.
2. Long cutting life
A pair of blades, if used for a longer service life, can save production costs, such as welding costs, labor costs, the opening of woodworking saw blades, testing and other processes. Therefore, for stone factories, it is very important to cut more square meters with the same efficiency.
3. The blade shape design is more effective
The shape of the blade mainly improves the sharpness, expands the water channel to improve the cooling effect of the coolant, and is also convenient for face milling. If the shape of the blade can achieve the above functions, then such a blade is a very good blade , On the contrary, the blade will produce a lot of bad problems due to various cooling problems and face milling problems.
4. The blade grinding speed is faster
This feature is related to the efficiency of the blade, but the grinding speed is not only reflected in the cutting efficiency level, but in terms of speed ratio, if the grinding speed of the blade is faster, then the woodworking saw blade will , not necessarily too high a speed ratio, can cut stone very well, and because of the faster grinding speed, it is difficult for stone chipping and bluestone slabs to break.
5. The blade design scheme is effective
If you take a sharpened blade, you will find that the blade has obvious diamonds exposed on the surface of the blade, and there is an obvious tail support at the back. This overall design of the blade will make the quality of the blade more stable and the product more stable sharp.
6. A good blade will use the secret recipe of high cobalt copper base
Such blades are dark in color, not easy to rust, and hard to clump, and are more suitable for cutting precious marble. Usually cheap blades look white, and such blades are easy to rust and cause stone pollution.
